| |
|
|
MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without ...
|
May 12th 2008 |
11,357k |
Shareware |
|
MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without ...
|
May 12th 2008 |
24,526k |
Shareware |
|
MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without ...
|
May 12th 2008 |
21,221k |
Shareware |
|
The application is designed for calculations of straight, maximum three times static indefinite beams with constant
axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units
and solves the following main tasks:
- Simple definition of the type of beam ...
|
May 12th 2008 |
1,437k |
Shareware |
|
Geometric design and strength check of bevel gear with with straight, helical and curved toothing. Application is
developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main
tasks:
- Calculation of straight, helical and curved toothing.
- Automatic ...
|
May 12th 2008 |
2,371k |
Shareware |
|
The calculation is designed for a geometrical design and strength check of a prestressed bolt connection, loaded
by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts.
Application is developed in MS Excel, ...
|
May 12th 2008 |
1,590k |
Shareware |
|
The program is designed to calculate the optimum cross-section and perform strength check of slender struts
strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile ...
|
May 12th 2008 |
1,399k |
Shareware |
|
The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical
springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is
developed in MS Excel, is multi-language, supports Imperial and Metric units and ...
|
May 12th 2008 |
2,039k |
Shareware |
|
The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a
cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following
tasks:
- Design of force fits, possibly shrink fits.
- Design of ...
|
May 12th 2008 |
1,586k |
Shareware |
|
Geometric design and strength check of internal spur gear with straight and helical toothing. Application is
developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main
tasks:
- Calculation of helical and straight toothing (internal).
- Automatic design ...
|
May 12th 2008 |
2,753k |
Shareware |
|
The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels
(max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the
following main tasks:
- Calculation of the necessary length of the ...
|
May 12th 2008 |
1,350k |
Shareware |
|
The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins.
The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with
securing pins, design of cross pin in rod ...
|
May 12th 2008 |
1,496k |
Shareware |
|
The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of
solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language,
supports Imperial and Metric units and solves the following tasks:
- ...
|
May 12th 2008 |
1,287k |
Shareware |
|
The calculation is designed for a geometrical design and strength check of common chain transmissions using roller
chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the
following tasks:
- Selection of a power suitable type of chain. ...
|
May 12th 2008 |
1,391k |
Shareware |
|
This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The
programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling
bearings ...
|
May 12th 2008 |
2,145k |
Shareware |
|
This module can be used for the selection, calculation and check of rolling bearings. The programme provides
solutions to the following tasks:
- Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings
from RBC Bearings, Nice ...
|
May 12th 2008 |
2,310k |
Shareware |
|
This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA.
The
programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling ...
|
May 12th 2008 |
2,096k |
Shareware |
|
Geometric designs and strength checks of shaped connections of shafts with hubs. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Design of a connection with parallel side keys.
- Design of a ...
|
May 12th 2008 |
1,618k |
Shareware |
|
The calculation is designed for geometrical design and complex strength check of shafts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Simple definition of installed shafts, including hollow ones.
- Options of definitions ...
|
May 12th 2008 |
1,577k |
Shareware |
|
The calculation is to be used for geometrical and strength design of metal springs of various types and designs,
subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and
Metric units and solves the following main tasks:
1) ...
|
May 12th 2008 |
2,076k |
Shareware |
